
Propulsion Systems Engineer
Propulsion - Villeneuve, CH
The position
- Crew
- Propulsion
- Location
- Villeneuve, CH
- Type of contract
- Full-time
Your role
The kick stage fluidics are no longer a sketch. They need to become hardware that can be filled, pressurized, fired, and qualified.
PAVE Space is building LYOBA, a heavy kick stage moving up to 4-ton payloads from LEO to high-energy orbits in under 24 hours. The feed system, pressurization system, fill and drain architecture, and ground interfaces already have a baseline. Now they need an owner who can mature them into flight hardware.
So, why now?
LYOBA is our flagship kick stage vehicle, and propulsion fluidic systems need to be matured, detailed, and qualified on a tight timeline. You'll inherit existing P&ID and baseline designs for the main feed and pressurization systems, and will drive the detailed design, integration, and qualification activities to flight readiness.
You will own
Kick stage fluidics architecture across main engine feed, pressurization, fill, drain, venting, and purge systems
P&IDs, line sizing, pressure budgets, component selection, and detailed fluidic design from current baseline to flight configuration
Propellant loading, unloading, venting, and ground interface logic for test campaigns and launch operations
Verification and validation strategy for the fluidics subsystem, including proof, leak, functional, environmental, and system-level test logic
Interfaces with propulsion, structures, thermal, avionics, GNC, ground support equipment, and operations
Hands-on support to assembly, integration, troubleshooting, test readiness, and qualification campaigns
What we are looking for
3+ years of experience with fluidic systems involving pressurized gases, propellants, hydraulics, pneumatics, or comparable high-reliability systems
Strong command of P&IDs, pressure systems, valves, regulators, sensors, fittings, tubing, and component selection
Solid fundamentals in fluid dynamics, thermodynamics, heat transfer, and pressure system design
Experience moving a fluidic system from architecture or preliminary design into detailed design, manufacturing, integration, and test
Ability to perform first-order sizing and analysis in tools such as Python, MATLAB, Excel, EcosimPro, Amesim, or equivalent
Comfortable working close to hardware: inspections, leak checks, functional tests, troubleshooting, and test data review
Fluent English, our working language
Nice to have:
Spacecraft, launch vehicle, kick stage, upper stage, or propulsion test bench experience
French language skills
Experience qualifying fluid systems for flight, or prior kick stage experience
You will fit if
You can take an existing P&ID and quickly see what is missing, overcomplicated, risky, or not yet testable
You like closing designs, not just creating diagrams
You are comfortable being accountable for both the analysis and the hardware it becomes
You know when simplicity is worth more than theoretical elegance, especially in a system that must be operated, tested, filled, drained, and trusted
You can work through incomplete inputs without waiting for someone else to make the problem tidy
The position is fully on-site in Villeneuve (VD). Propulsion/fluidic systems are in various stages of development, meaning you'll inherit work-in-progress and advance it to flight readiness. The timeline to flight is real and tight: design cycles will be measured in weeks, and decisions you make early will be hard to revisit later. That's the nature of the work, not a warning.
What makes it worth it: you will help build the data backbone behind one of the most ambitious propulsion programs in Switzerland.
We are building to ship, grounded on real hardware, real funding, and real milestones. Apply to contribute, surrounded by people as sharp as you are.